OptConnect neo2 dura Quick Start Manual page 12

9. Identify remote access ports numbers
Skip to Step 11 if you do not need to initiate a connection
from your host to your equipment through neo2 dura.
• neo2 dura is configured for common remote access
protocols such as https, RDP, vnc, ssh, GoToMyPC, etc. for
two clients
• Learn your preferred protocol's TCP/IP port number from a
manual or published resources, ex. https is port 443
• Prepend a digit to the protocol's port number to reach
your equipment according to the table below where xxx is
the port number on which your equipment will respond:
To reach your equip on port xxx
192.168.1.11....................................
192.168.1.12....................................
• Ex: directing your browser to <neo2 dura IP address> :
2443 establishes an https session on port 443 with your
equipment at IP address 192.168.1.12, the 2nd device in the
table above
• neo2 dura is pre-configured for remote access to two static
IP clients as per the table above. Contact our Customer Care
Center at 877.678.3343 for custom configurations.
Contact port
xxx
2xxx