Advertisement
Simple steps to Place, Plug & Play
1. Identify neo2 dura and its included accessories
2. Position the antenna
3. Place neo2 dura and connect antenna & power
4. Maximize signal strength and quality
5. Configure your equipment for DHCP
6. Configure your equipment for Static IP
7. Connect ethernet cable and test
8. Identify remote access IP address
9. Identify remote access port
10. Use the OptConnect Private Network for remote access
11. Manage your OptConnect Device
Advertisement
Need help?
Do you have a question about the neo2 dura and is the answer not in the manual?
Questions and answers