Advertisement
Create a table in an HTML web page and enter your list of frequently used Cisco IOS CLI commands.
To create the link for a CLI command, specify the IP address of the Cisco IOS
device followed by the command. Remember to include the forward slashes (/)
between each command mode and key word.
http://ip-address/exec/ios-key-word/.../cr
The web page can include many types of commands useful for managing a dial Internet access service,
including:
System commands (Table 26)
Interface commands (Table 27)
Call state commands (Table 28)
Debug commands (Table 29)
show running configuration show file systems
show version
show modem version
show controller t1
show isdn service
show isdn status
http:/172.23.84.20/exec/sh/caller/cr
show ip route
dir
show ip route static
show flash
show ip route connected
show ip interface brief
show interface
show interface Fast
Ethernet0/0/0
show line
Advertisement
