Advertisement
The dial engineers at THEnet created a tool called SNMP Commander that:
Provides web-based access to UCD-SNMP CLI commands.
Builds web-based OID bookmarks, which enable you to go to OIDs without using a keyboard.
Aids the MIB exploration and NMS design tasks.
By using SNMP Commander and a web browser, you can:
Create URL links for the network staff and help desk.
Identify target OIDs you want to graph by using MRTG.
Inspect thresholds and events to monitor by using other NMS systems.
The following two components work together to create SNMP Commander:
snmpcmds.dat—A comma separated variables file, which includes a list of SNMP CLI commands.
This file is read by the snmpcmds.pl script.
For the source code, go to
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/dialnms/snmpdat.txt
snmpcmds.pl—A script that loads and reads a data file. You can use additional data files by
creating multiple instances of the original script and altering the data file descriptor.
For the source code, go to
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/dialnms/snmppl.txt
To set up SNMP Commander, follow these steps:
From CCO, download snmpcmds.dat and snmpcmds.pl
Customize the files for your environment. When you find useful OIDs, enter them in the snmpcmds.dat
file and use the web-based form of the script to research the MIBs. The web tool functions like an SNMP
OID bookmarker.
Test SNMP Commander by using a web browser:
Select an SNMP command and OID.
Select an SNMP agent (Cisco IOS device).
Click Submit.
Inspect the program and query messages.
Advertisement
