Advertisement
For more information about other NMS enhancements for dial, see Call Tracker plus ISDN and
AAA Enhancements for the Cisco AS5300 and Cisco AS5800 at
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121limit/121x/121xh
/121xh_2/dt_cltrk.htm
To protect a network access server from over polling, use the SNMP get bulk feature.
It's available in SNMP v2 in CISCO-BULK-FILE-MIB.
Table 11 and Table 12 identify useful OIDs and variables within selected MIBs from Table 10.
Equivalent Cisco IOS commands are shown wherever applicable. Sometimes data is more clearly
inspected by using OIDs and a graphing tool instead of CLI commands.
To see the complete structure of the CISCO-POP-MGMT-MIB and CISCO-MODEM-MGMT-MIB,
go to the following URLs:
CISCO-POP-MGMT-MIB
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/dialnms/popmgt.txt
CISCO-MODEM-MGMT-MIB
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/dialnms/modemmgt.txt
Number of analog calls connected
Number of active DS0s in use
Total call count per DS0
Total time in use for each DS0
Total octets received on a DS0
Total octets transmitted on a DS0
Total packets received on a DS0
cpmISDNCfgBChanInUseForAn
alog
.1.3.6.1.4.1.9.10.19.1.1.2
cpmActiveDS0s
.1.3.6.1.4.1.9.10.19.1.1.4
cpmCallCount
.1.3.6.1.4.1.9.10.19.1.1.1.1.7
cpmTimeInUse
.1.3.6.1.4.1.9.10.19.1.1.1.1.8
cpmInOctets
.1.3.6.1.4.1.9.10.19.1.1.1.1.9
cpmOutOctets
.1.3.6.1.4.1.9.10.19.1.1.1.1.10
cpmInPackets
.1.3.6.1.4.1.9.10.19.1.1.1.1.11
show modem summary
show controllers t1
call-counters
show isdn memory (See the
number of call control
blocks, CCBs, in the
command output.)
show controllers t1
call-counters
show controllers t1
call-counters
None available
None available
None available
Advertisement
