Connections And Start Up - M2 Antenna Systems RC2800PRKX2SU Manual

1 2 3 4 5 6 7 8 9 10 11 12
CONNECTIONS:
Once the Azimuth and Elevation units have been wired up at the motor end, start the process of wiring the correct
color wires to the rear of the control unit. Use the table below for proper wire color and terminal number. Each
individual (12) position terminal strip, has been clearly marked to help with proper connection points.
((12) POSITION TERMINAL STRIP ASSIGNMENTS
TERMINAL NUMBER
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
Unwrap the AC power cord and plug it into the AC plug on the rear of the control unit. Plug the AC cord into a
reliable 115 VAC or 230 VAC source. Switching power supplies are used that can operate from 86VAC to
240VAC.
CUSTOMER NOTE AREA:

CONNECTIONS AND START UP

FUNCTION
MOTOR
MOTOR
(NOT USED)
(NOT USED)
(NOT USED)
HEATER (+) LEAD
HEATER (-) LEAD
(NOT USED)
(NOT USED)
REED SWITCH DC +
REED SWITCH RETURN
CASE GROUND
1 2 3 4 5 6 7 8 9 10 11 12
SUGGESTED COLOR
BLACK
WHITE
RED
BLACK
ORANGE
BLUE
BARE
MINIMUM WIRE GAUGE
16 AWG
16 AWG
16 AWG
16 AWG
24 AWG
24 AWG
NA