Water Tech Pool Blaster iVac 250 Installing And Upgrading

Your new kit includes:
Motor Box (P20X003LI)
Charger (LC099-2S-US-EU)
STEP 1: Place the unit on a flat workbench.
Use cutters to cut the lanyard that secures the
battery chamber cover.
Installation Guide - NiMH to Lithium
Need Help? Contact Customer Care at (732) 967-9888
Upgrading the Pool Blaster iVac 250 Motor Box
Why did my new motor box kit come with a charger?
This complete kit replaces all of the electronics for the Pool
Blaster iVac 250 and will guarantee that your machine will
be repaired and increase the longevity of your battery.
Your old charger will not work. Please dispose of your
original charger. Failure to do so will void warranty.
You will need the following tools:
Phillips screwdriver or battery
powered screwdriver
(set at low torque setting)
STEP 2: Use Phillips head to unscrew the four
screws located at the exhaust of the unit
(2 screws on each side). Place screws to the side.
Pliers and cutters
1