Related Manuals for Water Tech Pool Blaster Catfish
Summary of Contents for Water Tech Pool Blaster Catfish
- Page 1 Water Tech CATFISH ® POOL BLASTER ® & POOL BLASTER ® MAX CG NOTICE: THESE PRODUCTS ARE MANUFATCTURED UNDER ONE OR MORE OF THE FOLLOWING PATENTS: 6,797,157 6,939,460 D485,652...
-
Page 2: Before Initial Use
Before Initial Use CONGRATULATIONS on your purchase of a top-quality Water Tech product which has been thoroughly tested to meet our exacting quality control standards. State of the art Nickel-Metal Hydride batteries power the Pool Blaster. These are the same batteries used in many portable phones. In order to properly ventilate and cool the batteries and drive system a certain amount of space is left open in the Pool Blaster body. -
Page 3: Service Information
Use this product only for its intended use as described in this manual. Use only Only use the charger supplied to recharge this vacuum. Do not use the supplied Water Tech accessories and filters. charger with any other appliance. Never leave your Pool Blaster plugged in for long term storage. -
Page 4: Important Safeguards
Important Safeguards POOL BUSTER BODY Product Specifications HANDVAC BATTERY CHARGER Motor 7.2 Volt, DC Charger Rating 120V, 60 Hz AC only (US) FILTER BAG/SEAL RING 240 volts. 50Hz AC only (International) Switch On-Off Charger Voltage 8.4 Volt NOSE CAP VACUUM HEAD WHEELS (FOR GUNITE POOLS) ITEM No. - Page 5 CHARGING YOUR POOL BLASTER TO CHARGE The battery pack for your Pool Blaster has been shipped in a low voltage condition. It should be charged overnight prior to use. • Turn the knob counterclockwise to remove the On-Off Knob. This will expose the WARNING: charging jack connection.
-
Page 6: Inserting The Filter Bag
ENSURE BOTH LATCHES ARE FULLY SECURED Note: Wheels OR Brushes must be installed prior to use. Water Tech is NOT responsible for damages to your pool if neither the wheels nor brushes are installed in the vacuum head before use. - Page 7 HOW TO USE YOUR POOL BLASTER Your Pool Blaster is designed for use in 3 different ways to vacuum your CAUTION: The Pool Blaster is designed for underwater use only. Do not pool or spa: attempt to use your Pool Blaster to clean anything other than your pool or spa. It is not Vacuum using the handle and the vacuum head removed.
- Page 8 When servicing user serviceable parts, use only identi- cleaner will only work when completely submerged in water and the air is out of the cal Water Tech replacement parts. Use of any other parts may create a clear funnel. hazard or cause product damage.
-
Page 9: Maintenance
Damage or any failure caused by repair, which is or expenses of any kind of character. There are no other warranties or representations by Water Tech other than as set done by anyone other than a Water Tech authorized service center, shall not be covered. -
Page 10: Common Questions
Do not wash it in a washing A: Look for original Water Tech replacement parts at your local retailer or call 1-800-298-8800 for machine or with detergent. For more detailed instructions, see “Cleaning Your Pool Blaster”...