Summary of Contents for Water Tech POOL BLASTER MAX
Page 1
Use and Care Manual IMPORTANT: DO NOT RETURN THIS PRODUCT TO THE STORE Should you have any problems or questions concerning your product you should contact Water Tech’s Customer Service Division toll free in the U.S. at 1-800-298-8800 1-800-488-0700 or via fax at at www.PoolBlaster.com...
Page 2
Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Before Initial Use CONGRATULATIONS on your purchase of a top-quality Water Tech product which has been thoroughly tested to meet our exacting quality control standards. The Pool Blaster vacuum is powered by Nickel-Metal Hydride bat- teries. These batteries will operate at their peak after the second or third charge.
WARNING: Make sure the Pool Blaster is unplugged from the Any repairs requiring disassembly should be performed by a Water Tech Authorized Service Cen- charger and in the “off” position before clean- ter. For repairs please go to www.watertechcorp.com for ing, filter change or any other routine mainte-...
Page 5
ADDITIONAL PARTS AVAILABLE FOR PURCHASE ITEM No. DESCRIPTION PART No. QTY. Sand & Silt bag (part No. PBW022SS) Vacuum Head PBA006 Microfilter Bag (part No. PBW022MF), to be used in Vacuum Head Brushs PBW049 conjunction with the Sand & Silt bag Vacuum Head Wheels PBW050 Shallow Water Hose Attachment (part No.
SETTING UP YOUR POOL BLASTER FOR USE CHARGING YOUR CLEANER Charging the Battery Pack TO RECHARGE THE CLEANER Turn the knob counterclockwise to remove the On-Off Knob. This will expose the charging jack connection. PRECAUTIONS: NOTE: When removing the On/Off knob it is normal to •...
Page 7
CAUTION: Wheels OR Brushes with Front Wheel must be installed prior to use. Water Tech is NOT responsible for damages to your pool if neither the wheels nor brushes with Front Wheel are installed in...
Page 8
HOW TO USE YOUR POOL BLASTER CAUTION: Once your Pool Blaster is set-up for use, you may put it in The Pool Blaster is designed for under your pool or spa. water use only. • Bring your Pool Blaster to the side of the Pool or OPERATING TEMPERATURES Spa and turn it on by turning the Unit must be submerged in water to operate properly.
• Store your Pool Blaster in a clean, dry place when not a Water Tech Authorized Service Center. For the repair center in use. Do not leave it underwater, in direct sunlight, or nearest you call us toll free at 1-800-298-8800. Unauthorized exposed to extreme heat or cold.
RMA number in thick black indelible marker on two sides of the box. (4) Send the package by USPS or express courier of choice to: Water Tech Corp. 44 West Ferris Street, East Brunswick, New Jersey 08816; (WT suggests you insure the contents of your package.) WT is not responsible for lost, stolen or damaged property in transit to WT.
The filter bag can then be turned inside out and rinsed with a hose or in a sink. Do not wash it in a washing A: Look for original Water Tech replacement parts at your local machine or with detergent. For more detailed instructions, retailer or on the web at www.PoolBlaster.com.
Page 12
IMPORTANT: DO NOT RETURN THIS PRODUCT TO THE STORE Should you have any problems or questions concerning your product you should contact Water Tech’s Customer Service Division toll free in the U.S. at 1-800-298-8800 1-800-488-0700 or via fax at at www.PoolBlaster.com...
Need help?
Do you have a question about the POOL BLASTER MAX and is the answer not in the manual?
Questions and answers