La Crosse Technology ED31411 Quick Setup Manual page 2

Get Started
Step 1: Insert the 5 volt AC cord (included) into the wall outlet then into
the forecast station.
Step 2: Insert the 3 new AAA Alkaline batteries (not included) into the
forecast station. Observe the correct polarity.
Step 3: Insert the 2 new AA batteries (not included) into the
TX141TH-BV2 outdoor sensor. Observe the correct polarity. The red LED
will flash during transmission.
Restart: If there is no outdoor temperature/humidity data after 3 minutes, unplug
the AC adapter and remove batteries from the forecast station & outdoor sensor
for 15 minutes. Return to Step 1 above.
Set Time, Date, Temperature Unit
1. Hold the TIME SET button to enter time set mode.
2. Press the ▼ or ▲ buttons to adjust the values.
3. Press the TIME SET button to confirm adjustments and move to the
next item.
4. The default week language is French.
Time setting order:
1. Beep on/off
2. Time Zone +/-12 H
3. 12/24 hour time format
4. Hour
5. Minutes
6. Year
7. Month
8. Date
9. Celsius/Fahrenheit
10. Language(FRE,GER, ITA, DUT, SPA, DAN, ENG)
Press the SNOOZE/LIGHT(HI-LOW-OFF) button to exit, or wait 20

seconds without pressing buttons to return to the normal time display.
When in setting mode of any feature, all the rest of the information of

the LCD should disappear, only concentrate in the setting of the
feature.
Set Indoor and Outdoor Temperature Alerts
1. Hold the ALERTES button until the station beeps.
2. The temperature alert value will blink in set mode.
3. Press the ▼ or ▲ buttons to adjust the values.
Page | 2