Entrust nShield Solo Installation Manual page 25

nShield Solo XC
Server:
enquiry reply flags none
enquiry reply level Six
serial number ############-####
mode operational
version #.#.#
speed index ###
rec. queue ##..##
...
module type code 0
product name nFast server
...
version serial #
remote server port ####
Module ##:
enquiry reply flags none
enquiry reply level Six
serial number ############-####
mode operational
version #.#.#
speed index ###
rec. queue ##..##
...
module type code 12
product name #######/#######/#######
...
rec. LongJobs queue ##
SEE machine type Power PCELF
supported KML types DSAp1024s160 DSAp3072s256
hardware status OK
mode operational
If the is
mode initialization
If the is
you must change the mode to operational.See the User Guide for your module and
operating system for more about changing the module mode.
If the output from the
your computer, then re-run the
Under Windows 7 and Windows 2008 R2 and higher versions , ensure
that the power saving features are disabled. See

for more information. Otherwise, if your system enters Sleep mode, the
nShield Solo module may not be found when running enquiry. If this
happens, you need to reboot your system.
8.1.2. nFast server (hardserver)
Communication can only be established with a module if the nFast server is running. If
the server is not running, the
NFast_App_Connect failed: ServerNotRunning
nShield® Solo and nShield® Solo XC Installation Guide
the module has been installed correctly.
or maintenance, the module has been installed correctly, but
enquiry
command says that the module is not found, first restart
enquiry
command.
enquiry
utility returns the message:
Installing the module
25 of 49