Installing The Security World Software On Linux - Entrust nShield Solo Installation Manual

◦ If nShield CSPs (CAPI, CNG) was selected: 64bit CSP install wizard, which sets
up CSPs for 64-bit applications
◦ If nShield CSPs (CAPI, CNG) was selected: CNG configuration wizard, which
sets up the CNG providers
◦ If the nShield Java package was selected: KeySafe, which runs the key
management application
◦ If nShield Remote Administration Client Tools was selected: Remote
Administration Client, which runs the remote administration client
If selected, the SNMP agent will be installed, but will not be added to the
Services area in Control Panel > Administrative Tools of the target Windows
machine. If you wish to install the SNMP agent as a service, please consult the
SNMP monitoring agent section in the User Guide.
Do not run any CSP installation wizard before installing the module

hardware.
6. Click Finish to complete the installation.
7. The following global variables are set upon install:
◦ %NFAST_CERTDIR%
◦ %NFAST_HOME%
◦ %NFAST_KMDATA%
◦ %NFAST_LOGDIR%
You may additionally need to do the following after you have installed the software:
• In the Windows Device Manager > Security Accelerator, select the appropriate
module.
• Under Properties > Power Management, deselect Allow the computer to turn off
this device to save power.

7.2. Installing the Security World Software on Linux

In the following instructions, disc-name is the name of the mount point

of the installation media.
1. Log in as a user with root privileges.
2. Place the installation media in the optical disc drive, and mount the drive.
3. Open a terminal window, and change to the root directory.
4. Extract the required
commands of the form:
nShield® Solo and nShield® Solo XC Installation Guide
.tar
files to install all the software bundles by running
21 of 49