Before Installing The Module; Back Panel And Jumper Switches - Entrust nShield Solo Installation Manual

4. Before installing the module

4.1. Back panel and jumper switches

Label Description
A Status LED
B Recessed clear button
C Physical mode switch
D Physical mode override jumper switch, in the off position. When set to on, the
mode switch (C) is deactivated. See the User Guide for more information.
E Remote mode override jumper switch, in the off position. When set to on,
remote mode switching is disabled. See the User Guide for more information.
F A mini-DIN connector for connecting a smart card reader.
The configuration of connectors varies between modules and might not

be as in the image.
nShield® Solo and nShield® Solo XC Installation Guide 10 of 49