Router Mode - Vivotek 600AG User Manual

4.4. Router Mode

When using point to point to connect two LANs together, router mode configuration is required. The
setting of router mode point to point is similar to that of bridge mode, but need to be careful with the
setting of IP addresses and gateway to let the data packet be able to go the desired way.
Wireless 1 IP: 10.10.1.2
Ethernet
Configurations
System Operation Mode
Ethernet IP Address
Wireless 1
Routing Information
Wireless 1 IP Address
ESSID
Operation mode
Band
Channel
MAX RF Distance
WAN Interface
Default Gateway
IP:192.168.2.254
AP A
Route
192.168.2.254/24
Enable
BOTH
10.10.1.2/30
PTPRoute
Access Point
802.11b/g
1 2412MHz
100 (10km)
Wireless 1
10.10.1.1
Wireless 1 IP: 10.10.1.1
Ethernet IP:192.168.1.254
Route
192.168.1.254/24
Enable
BOTH
10.10.1.1/30
PTPRoute
Wireless Station
802.11b/g
AUTO
100 (10km)
Wireless 1
10.10.1.2
AP B