General Configuration; System General Setup - Vivotek 600AG User Manual

3.2. General Configuration

The General configuration consists of four major parts:

11. System General Setup

12. Interface Configuration
13. Assign WAN interface
14. Routing Configuration
11. System General Setup
Normal Serial
- Device Name
"Device Name" is a 32 bytes alphabetical string for naming the device for identification.
- Description
"Description" is a 128 bytes alphabetical string to identifying a particular outdoor access point.
- System Operation Mode
the AP can operate in Bridge mode, Transparent Bridge mode and Router mode. Note that
when the AP is configured to operate in bridge mode, all interfaces operate as bridge. When it is
operating in route mode, all interfaces have its own IP address. Here is a table showing the
default IP setting in different operation mode below:
Operation Mode
Bridge
Transparent Bridge
Router
Default IP Address
Bridge Ethernet
192.168.1.1
192.168.1.1
192.168.1.1
Hi-mobile Serial
Wireless-1
192.168.1.1
192.168.1.1
192.168.100.254