Snmp Configuration; Wireless Security Setting - Vivotek 600AG User Manual

802.11a/b/g intelligent sequential outdoor wireless access point
Hide thumbs Also See for 600AG:
Table of Contents

Advertisement

Single Address (NAT/PAT)
A range of internal IP addresses can be mapped to a single global WAN IP addresses here.

25. SNMP configuration

SNMP is configured here for simple network management. 600AG serial supports all SNMP v1,
v2 and v3. we has experience working with ILECs, CLECs, WISPs and MSOs.

26. Wireless Security Setting

Comprehensive security settings are available on 600AG serial in this menu. These include Hide
ESSID, WEP Keys, 802.1x EAP-TLS, 802.1x EAP-MD5, WPA/WPA2-PSK, WPA/WPA2-EAP, MAC
Address Filtering and RADIUS. Details of each type of security are in appendix. The security setting
of each wireless interface is configured separately. Note the message at the bottom of SMT page for
information on each selection items.
- Hide ESSID
When Hide ESSID is enabled, the ESSID of an AP will not be seen so only the authorized AC
knows the existence of the AP. This prevents an unexpected client connecting to the AP.

Advertisement

Table of Contents
loading

This manual is also suitable for:

M600ag

Table of Contents