Depend on your deployments system and service design plan, you can set Maximum AC
connection amounts from 1~255 AC. (Default 0 is disable this function)
When too many AC demand to link AP, need the useful AC release connection after new AC just
can has connect right to get AP service.
3.4. System Management
Under System Management, you will be able to operate the system by following:
31. Configuration Management
32. Security File Management
33. Firmware Upgrade
34. System reboot
31. Configuration management
The configuration of 600AG can be backed-up or restored by using TFTP here. In a daisy chained
sequential configurations, it is recommended to backup all configurations before uploading /
upgrading firmware. You may name your configuration file in any ways you like.