Accessories; Fitting Kits; Dual Ignition Control Kit Part# Ha1201 - Dometic SeasStar Power Assist Installation And User Manual

HF5530
Tee Fitting
(3 per kit)
3/8" TUBE
3/8"
TUBE
NPT fittings.
Figure 6-1.
EN

6 Accessories

6.1 Fitting kits

HF5540
45° Fitting
(3 per kit)
1/4" NPT
3/8" TUBE
NPT fittings.
6.2 Dual ignition control kit
part# HA1201
NOTE
You will need one HA1201 kit for a twin, and another kit for each
additional engine.
Many newer engines use a single ignition switch for multiple engines.
If you have such engines you will not need this kit.
The Dual Ignition Control Kit is designed to connect the P/A unit's ignition
wire to two ignition switches, ensuring the power assist is active when at
least one engine is on. Refer to the instructions included with the kit for
more information.
Figure 6-2. Sample triple-engine schematic.
HF6005
Tee Fitting
(2 per kit)
3/8"
TUBE
3/8"
TUBE
-5 ORB
ORB, -3 cylinders/helms ONLY.
P/A UNIT
ENGINE #3
HF6006
Tee Fitting
(2 per kit)
3/8" 3/8"
TUBE TUBE
-5 ORB
ORB, -3 cylinders/helms ONLY.
ENGINE #1
ENGINE #2
6-1