Compatibility; Tools Required - Dometic SeasStar Power Assist Installation And User Manual

3-2

Compatibility

3.1.1
The SeaStar P/A and P/A PRO are designed for use in recreational marine
applications. See the matrix below for helm, cylinder, P/A, and hose
compatibility.
NOTE
The power assist can be used with helms of any displacement, but we
recommend 1.4, 1.7, and 2.0 helm pumps for optimal performance.
Helm compatibility
SeaStar
SeaStar PRO
Hose compatibility
SeaStar
SeaStar PRO
Nylon tube
Cylinder compatibility
All SeaStar front mount
outboard cylinders
All SeaStar inboard and
sterndrive cylinders (except
power steering cylinders)
HC5380(-3), HC5370(-3)
or any other unbalanced
cylinder*
Table 3-1.
* An unbalanced cylinder is one in which the shaft exits one end of the barrel only.
WARNING!
Do not use with Baystar steering cylinders. The P/A can output enough
pressure to damage the Baystar support rods.

Tools required

3.1.2
You will need the following tools to complete your installation.
• 1/2", 5/8", and 3/4" open end wrench.
• Electrical cut and crimp pliers.
• All other tools noted with your helm pump and steering cylinder
installation instructions.
Power Assist Model
PA12XX-2, PA1200-2HP
✓
✕
✓
✓
✕
(may be used for compensating line only)
✓
✓
✓
PA1315-2 (PRO)
✕
✓
✕
✓
✓
✓
✕
EN