EN
5.1 Warning lights
Green and red lights indicate the status of the SeaStar Power Assist.
• Green. Steady (no flash)
Normal operation.
• Red. Steady (no flash)
Internal fuse blown.
Solution: Contact Dometic.
• Red. Two flashes, long pause
Standby mode, lack of calibration.
Solution: Contact Dometic.
• Red. Three flashes, long pause
Calibration mode.
Solution: Turn off ignition, after one minute, turn ignition on. If problem
persists, contact Dometic.
• Red. Four flashes, long pause
Tuning mode.
Solution: Turn off ignition, after one minute, turn ignition on. If problem
persists, contact Dometic.
• Red. Five flashes, long pause
Over-voltage mode.
Solution: Check ignition and battery voltage. must be less than 32 Volts,
correct as required.
5-3