ABB HT564586 Operation Manual page 91

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly
Assembly
Screws on the filter silencer casing
No screws are tightened until end of filter silencer casing assembly. Only this
way is it possible to fit all the parts.
NOTICE
Do not tighten the screws during assembly.

Figure 23: Fitting filter silencer casing 1
Fit the bottom part (01) to the filter silencer (81000) with screws (A) and (B).

Screw (A)
The location of screw (A) serves as a reference for the correct assembly of
the filter silencer casing.
NOTICE
Before disassembling the bottom part (01), mark the location of screw (A).

Fit all remaining screws on the bottom part (01).

© Copyright 2016 ABB. All rights reserved. HZTL4034_EN
Page 61 / 111
Revision F June 2016