ABB HT564586 Operation Manual page 63

Operation Manual / 4 Product description / A100-L
5 Operation and service
5.2.5 Service work according to instructions of enginebuilder
Clean or replace the oil filter located in the supply pipe to the turbocharger while the en-

gine is stopped.
5.2.6 Entries in the engine logbook
The monitoring of the engine system enables conclusions to be drawn on the behaviour of the
turbocharger.
The following operating data and measured values must be entered regularly into the engine
logbook of the enginebuilder:
 Performance and speed of the engine
 Speed of the turbocharger
 Air intake temperature
 Exhaust gas temperature before and after the turbine
 Pressure of the charge air
 Pressure loss in the charge air cooler
 Lubricating oil pressure and lubricating oil temperature
 Pressure loss in the filter silencer
Air temperature after the charge air cooler

If present:
 Air temperature after the compressor
© Copyright 2016 ABB. All rights reserved. HZTL4034_EN
Page 33 / 111
Revision F June 2016