Table of Contents
Advertisement
1)
Problem
Not possible to
After cycle start it is not possible to
change the pro-
change the program or option.
gram or option.
Not possible to
The option you tried to select is
select an option.
not available for the selected pro-
Acoustic signal
gram.
is emitted.
Unexpected du-
The drying duration is calculated
ration time on
according to load size and damp-
the display.
ness.
The water container is full.
Program inac-
tive.
Load size is small.
Drying cycle too
short.
The laundry is too dry.
The filter is clogged.
The load is too large.
The laundry was not spun suffi-
Drying cycle too
ciently.
6)
long
Too low or too high room temper-
ature - this is not the appliance
malfunction.
1) If there is an error message on the display (e.g. E51): Turn the tumble dryer off and on. Select a new
program. Push the Start/Pause button. If the appliance does not operate contact the service centre and
provide the error code.
2) Follow the program description — see PROGRAMS chapter
3) See chapter CARE AND CLEANING
4) Only dryers with Dryness option
5) See HINTS AND TIPS chapter
6) Note: After a maximum of 5 hours the drying cycle ends automatically.
Possible cause
Remedy
Turn the tumble dryer off and on.
Change the program or option as
required.
Turn the tumble dryer off and on.
Change the program or option as
required.
This is automated — the appliance
is working correctly.
Drain the water container, push
the
Start/Pause button.
Select time program. The time val-
ue must be related to the load. To
dry 1 item or a small amount of
laundry we recommend short dry-
ing times.
Select time program or higher dry-
extra dry )
ness level (e.g.
Clean the filter.
Do not exceed the maximum load
size.
Spin the laundry well.
Ensure a room temperature higher
than +5°C and lower than +35°C.
Optimal room temperature to ach-
ieve best drying results is between
19°-24°C.
ENGLISH
19
3)
Advertisement
Table of Contents
