AEG Lavatherm 720 Operating Instructions Manual
Hide thumbs
Also See for Lavatherm 720:
- Operating instructions manual (16 pages) ,
- Operating instructions manual (16 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Need help?
Do you have a question about the Lavatherm 720 and is the answer not in the manual?
Questions and answers
Sikringen kobles ut når jeg starter maskinen
The AEG Lavatherm 720 may trip the circuit breaker when starting due to several possible reasons:
1. Overloaded Circuit – The dryer may be drawing more current than the circuit can handle, especially if other appliances are on the same circuit.
2. Faulty Heating Element – A shorted or damaged heating element can cause excessive current draw, leading to a breaker trip.
3. Motor Issues – A defective motor or motor capacitor may cause a high inrush current or short circuit when starting.
4. Electrical Short – Damaged wiring, loose connections, or moisture inside the dryer can create a short circuit.
5. Faulty Start Relay – If the start relay is malfunctioning, it may cause an electrical fault when the dryer turns on.
6. Ground Fault – A leakage current to the ground can trigger a ground fault interrupter (GFI) or residual current device (RCD).
7. Breaker Sensitivity – A weak or old circuit breaker may trip more easily under normal startup load.
To diagnose the issue, check the power supply, inspect the heating element, motor, and wiring for faults, and test the dryer on a different circuit. If the problem persists, professional repair may be needed.
This answer is automatically generated