Cornwell Tools CTBMM500NGBKE Assembly Instructions

5 drawer pro series service cart w/ power strip

Advertisement

ASSEMBLY INSTRUCTIONS
SWIVEL CASTER
Mount push handle (Part #5) to the
same side of the cart as the locking
casters using the four stove bolts,
washers, and nuts provided.
Using 13mm socket completely tighten
all nuts.
CTBMM500NGBKE
SWIVEL CASTER (LOCKING)
• Read and follow all instructions in User's Manual.
• Do not load carts beyond rated capacity:
Maximum Total Net Load ...................................................... 700 Lbs.
Top 3 Drawers .................................................................75 Lbs. each
Bottom 2 Drawers .........................................................150 Lbs. each
PLEASE NOTE: Loading cart beyond rated capacity may cause
structural damage to the cart as well as personal and/or property
damage. Please educate your customers to the "dangers of
overloading".
• Lock lid and drawers before moving. • Apply brake on locking
casters anytime cart is in place. • Do not pull cart. Push from
handle on end to move. • Units can tip or fall causing damage or
personal injury. • Cart is designed to roll easily on flat surfaces and
should not be used on uneven or inclined surfaces. • Do not open
more than one loaded drawer at a time. • Do not stand on or step
in drawers. • Keep children away from unit. • Wear gloves when
lifting edges. • Before connecting to a power supply, always check
to make sure the power supply corresponds to the voltage required
on the product. • Fully insert plug to reduce the risk of electric
shock. • Always unplug when not in use. • Disconnect power before
installing or servicing. • Do not try to plug in unit or product when
hands are wet or damp, or if standing on a wet or damp surface
or in water. • Never attempt to pick up unit or plugged in product
that should fall in standing water. • This unit is not waterproof and
is intended for general use indoors. • Do not use in potentially
dangerous locations, such as flammable or explosive atmospheres.
• Keep cord away from heat, oil, sharp edges or moving parts.
• Failure to heed these warnings may result in personal injury and/
or property damage.
WARNING: This product can expose you to
chemicals including nickel, which is known to the
State of California to cause cancer and birth defects
or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
1
CTBMM500NGBKE
5 Drawer Pro Series
Service Cart w/ Power Strip
WARNING
Rev. 11/23/18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CTBMM500NGBKE and is the answer not in the manual?

Questions and answers

Summary of Contents for Cornwell Tools CTBMM500NGBKE

  • Page 1 CTBMM500NGBKE 5 Drawer Pro Series Service Cart w/ Power Strip ASSEMBLY INSTRUCTIONS WARNING • Read and follow all instructions in User's Manual. • Do not load carts beyond rated capacity: Maximum Total Net Load ............700 Lbs. Top 3 Drawers ..............75 Lbs. each Bottom 2 Drawers ............150 Lbs.
  • Page 2 CTBMM500NGBKE 5 Drawer Pro Series Service Cart w/ Power Strip HARDWARE SPECIFICATIONS 1 x 4 pcs. 2 x 4 pcs. Flat washer Nylon nut 3 x 4 pcs. M8 bolt (6mm-19mm) TROUBLESHOOTING Troubleshooting Points for the CTBMM500 Series: Problem: Drawers appear not to fit, do not slide in accurately Problem: Back Lock/Unlock Switch does not engage and bump the cart sides.
  • Page 3 CTBMM500NGBKE 5 Drawer Pro Series Service Cart w/ Power Strip PARTS LIST Item # Part # Description QTY. CTBBKGN1000LID Lid - Black w/Green logo RSGPBK Black Gas piston / each RSLMC500NGN Locking mechanism (excl lock w/keys) (Neon Green) Cart frame (Neon Green)

Table of Contents