Table of Contents
Advertisement
us_main.book.book Page 10 Monday, May 2, 2022 12:44 PM
10 INSTALLATION
Dimensions and Clearances
• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to
move the refrigerator through doors or narrow openings.
• If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/
Assembling Doors and Drawers in this manual.
• The installation location chosen for the refrigerator should allow space behind the unit for connections
and airflow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased
electricity consumption charges. Allow at least 2 inches (50 mm) between the back of the refrigerator
and the wall.
• Remember to allow enough room in front of the refrigerator to fully open the doors.
-
Dimensions/Clearances
A
Depth without Handle
B
Width
C
Height to Top of Case
D
Height to Top of Hinge
E
Back Clearance
F
Depth without Door
G
Depth (Total with Door Open 90°)
Leveling
Leveling the Refrigerator
The refrigerator has two front leveling legs. Adjust
the legs to alter the tilt from front-to-back or side-
to side. If the refrigerator seems unsteady or the
doors do not close easily, adjust the refrigerator's
tilt, using the instructions below:
1
Turn the leveling leg to the left to raise that
side of the refrigerator or to the right to lower
it. It may take several turns of the leveling leg
to adjust the tilt of the refrigerator.
B
A
C
G
D
LRONC0705*
21 7/8" (555 mm)
20 5/8" (525 mm)
50 7/8" (1292 mm)
51" (1295 mm)
2" (50 mm)
18 5/8" (473 mm)
39 5/8" (1008 mm)
NOTE
• A flare nut wrench works best, but an open-end
E
F
LRONC0605*
21 7/8" (555 mm)
20 5/8" (525 mm)
44 5/8" (1132 mm)
44 5/8" (1135 mm)
2" (50 mm)
18 5/8" (473 mm)
39 5/8" (1008 mm)
wrench will suffice. Do not over-tighten.
Advertisement
Table of Contents
