Siemens CO565AGS0 Instruction Manual page 25

Automatic programmes
en
Use the rotary selector to set the weight to 1 kg.
4.
The appliance automatically sets the right cooking
time for that weight.
Touch u.
5.
The programme will start. The cooking time visibly
counts down and the temperature bar and the u LED
light up.
Notes
Before starting you can use X and ‚ to switch
■
between programmes and weight.
Once you have started the programme, the
■
programme number and weight cannot be changed.
You can check the set weight by touching ‚.
The programme has ended
An audible signal sounds. The programme has finished;
the appliance stops heating.
Turn the function selector to the off position.
Changing the programme
Touch the u field for approx. four seconds.
1.
The programme is reset.
Select a new programme.
2.
Pausing the operation
Touch the u field or open the appliance door.
1.
The operation is suspended and the u LED
flashes.
Close the appliance door.
2.
Touch the u field.
3.
The operation is continued and the u LED lights
up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
The fan may continue to run after the appliance
Note:
has been paused or stopped.
24
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.