Janome DKS100 SE Instruction Book page 44

z
e
w
q
x
c
u
i
r
y
t
Start sewing
z Fold up the upper seam allowance. Fold back the
bottom seam allowance to form a 0.3 cm (1/8˝) fold.
Place the zipper teeth next to the fold and pin the
zipper tape to the zipper opening.
q Upper seam allowance
w Bottom seam allowance
e 0.3 cm (1/8˝)
r Zipper teeth
t Fold
y Zipper opening
x Attach the zipper foot with the pin on the right. Sew
through all the layers from the end of the zipper
opening, guiding the zipper teeth along the edge of
the foot.
c Stop the machine 5 cm (2˝) before the foot reaches
the slider on the zipper tape. Lower the needle into
the fabric, and raise the foot. Open the zipper, then
lower the foot and stitch the remainder of the seam.
u Slider
i 5 cm (2˝)
41