Adjusting The Stitch Width And Density In Buttonholes; Automatic Buttonhole; To Change The Stitch Width; To Change The Stitch Density - Janome Sewing Machine Instruction Book

Adjusting the stitch width and density in
buttonholes

• To change the stitch width

The stitch width key controls the stitch width.
The pre-set buttonhole widths are: square buttonhole
5.0, rounded buttonhole 4.0, keyhole buttonhole 7.0,
stretch buttonhole 5.0, knit buttonhole 5.0.
Press "+" or "–" to adjust the stitch width of the entire
buttonhole, ranging between 2.5 to 7.0 depending on
the selected buttonhole.
q Narrower width by pressing "–"
w Wider width by pressing "+"

• To change the stitch density

The stitch length key controls the stitch density.
The pre-set density varies from 0.4 to 1.0 according to
the buttonhole selected.
Press "+" or "–" to adjust the stitch density of the entire
buttonhole between 0.2 to 1.2 depending on the
selected buttonhole.
e Denser stitch by pressing "–".
r Coarser stitch by pressing "+".

Round end buttonhole

q Stitch pattern:
w Thread tension dial:
e Presser foot:
* Sewing procedure is the same as automatic buttonhole.
r Starting point
t Bartacking

Keyhole buttonhole

q Stitch pattern:
w Thread tension dial:
e Presser foot:
* Sewing procedure is the same as automatic buttonhole.
r Starting point
t Bartacking
13
1 to 5
Automatic buttonhole foot: R
14
1 to 5
Automatic buttonhole foot: R
q w
q
r
q
r
31
e r
w e
t
w e
t