Advertisement
CLEANING AND MAINTENANCE
1.
Clean the inner liner, ice collecting tray, water box, ice shovel and
evaporator frequently. When cleaning, unplug the unit and remove the ice
cubes. Use a diluted solution of water and vinegar to clean the inside and
the outside surface of the Ice maker. Do not spray Ice maker with
chemicals or diluted agents such as acids, gasoline or oil. Rinse
thoroughly before starting.
2.
Keep ventilation openings in the appliance enclosure, or in the built-in
structure, clear of obstruction. Do not use mechanical devices or other
means to accelerate the defrosting process, other than those
recommended by the manufacturer.
3.
Reuse the machine after being idled for a period of time, it may not have
enough water to pump for air retard, in this case, the water shortage
indicator "ADD WATER" will light up, repress power button to restart the
ice maker is okay.
4.
To ensure the cleanness of ice, please change water for water reservoir at
least once one day. If do not use for a long time, please drain the water
out and clean it up.
5.
If the compressor takes a strike action for shortage water, fully water or
interruption of power supply, it will delay for 3mins to start up after
restarted.
6.
Always use fresh water before starting ice production either at initial
installation or after a long shut-off period.
TROUBLESHOOTING
1.
Please note, if a power failure occurs due to disconnection of the power
cord, or the power button has been pushed off during an ice making cycle,
small ice chips may formed and lodge in the automatic shovel causing it to
jam. If this occurs, the ice chips may be removed by disconnecting the
power cord and gently pushing the shovel to the rear of the cabinet and
removing the ice chips, then restarting.
8
- Quick Links:
- Cleaning and Maintenance
Hide quick links:
Advertisement
