Introduction...............................................................................
Before First Use........................................................................
Limited Warranty....................................................................
USA CANADA 1-800-
ICE MAKER
EFIC121-B-SS
2
3
4
5
6
7
8
9
11
12
Need help?
Do you have a question about the EFIC121-B-SS and is the answer not in the manual?
Questions and answers
Power outage cause my ice maker to stop working and light up Add Water light. I’ve cleaned it out and restarted it, still same result
If the Frigidaire EFIC121-B-SS ice maker is not working and showing the "Add Water" light after a power outage, it could be due to air in the water lines or blocked lines preventing the water tank from detecting the water level. To resolve this:
1. Turn off the ice maker.
2. Unplug the unit.
3. Remove the drain cap at the back of the unit and drain a small amount of water.
4. Replace the drain cap.
5. Plug the unit back in and restart it.
If the issue persists, check if ice is blocking the ice pusher. Allow the ice to melt, then restart the unit.
This answer is automatically generated