Table of Contents
Advertisement
Figure 69. Removing the expansion card riser (Riser 2)
3. For Riser 3, loosen the captive screw, and then press the blue release tab and holding the edges lift the expansion card riser
from the riser connector on the system board.
Figure 70. Removing the expansion card riser (Riser 3)
4. For Riser 4, loosen the captive screw on the riser, and then press the blue release tab on the riser, and holding the touch
point lift the expansion card riser from the riser connector on the system board.
Installing and removing system components
79
Advertisement
Table of Contents
