Technical Specifications - Harman Kardon AVR 70 Owner's Manual

AVR70 engelsk manual 11/01/98 11:57
Audio Section
Stereo Mode
Continuous Average Power (FTC)
80 Watts per channel 20Hz–20kHz:
@ < 0.09% THD, both channels driven into 8 Ohms
Five Channel Surround Mode
Continuous average power per channel (FTC)
Front L&R channels:
70 Watts per channel from 20Hz–20KHz,
@ < 0.15% THD, both channels driven into 8 Ohms
Center channel:
70 Watts from 20Hz–20kHz,
@ < 0.15% THD, driven into 8 Ohms
Surround channels:
25 Watts per channel from 40Hz–20kHz,
@ < 0.15% THD, both channels driven into 8 Ohms
Input Sensitivity/Impedance
Linear
Signal to Noise Rate (IHF-A)
Linear
Dolby Surround
Channel Separation
FM Tuner Section
Frequency Range
Usable Sensitivity
Signal to Noise Ratio
Distortion
Stereo Separation
Alternate Channel
Selectivity (±300kHz)
Image Rejection
Side 28

Technical Specifications

28
220mV/50 Kohms
95 dB
40dB
87.5–108.0MHz
IHF 1.3 µV/13.5dBf
Mono/Stereo 76/68dB
Mono/Stereo 0.2/0.5%
1 kHz 40dB
55dB
98MHz: 70dB
AM Tuner Section
Frequency Range
Signal-to-Noise Ratio
Usable Sensitivity
Distortion
Selectivity ±18kHz
Video Section
Television Format
Input Level/Impedance
Output Level/Impedance
Video Frequency Response 10Hz to 8MHz (–3dB)
S/N
General
Power Requirement
Power Consumption
Dimension (Max)
Width
Height
Depth
Weight
All features and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories Licensing Corporation.
Additionally licensed under one or more of the following patents:
U.S. numbers 3,632,886, 3,746,792 and 3,959,590;
Canadian numbers 1,004,603 and 1,037,877.
"Dolby" and the double-D symbol are registered trademarks
of Dolby Laboratories Licensing Corporation.
531–1602/152–282kHz
50dB
Loop: 500µV (MW)/1,500 µV (LW)
1kHz, 30% Mod: 0.5%
70dB
PAL, SECAM, NTSC
1Vp-p/75ohms
1Vp-p/75ohms
65dB
AC 230V 50Hz
40W idle, 530W maximum
440 mm (17.4 inches)
160 mm (6.4 inches)
459 mm (18 inches)
12.3 kg (27 lbs.)