Unpacking The Appliance; Finding The Wall Studs - Danby DOM014401G1 Installation Manual

24” over the range sensor microwave

Hide thumbs Also See for DOM014401G1:

Table of Contents

Available languages

INSTALLATION INSTRUCTIONS

UNPACKING THE APPLIANCE

1. Open the carton and remove the upper foam

from the box. Keep the accessories.

2. Remove the microwave from the carton and

remove the plastic bag.

3. Remove the mounting bracket from the upper

foam.

1. Use a stud ﬁ nder to locate the wall stud. If a

stud ﬁ nder is not available, use a hammer to

tap lightly on the wall to ﬁ nd a solid sound. This

sound indicates the location of the wall stud.

2. Find the center of the wall stud by probing the

wall with a small nail to ﬁ nd the edges of the

stud. Draw a line down the center of the wall

stud.

Note: The microwave must be connected to at least

one wall stud.

Table of Contents