Unpacking The Appliance; Finding The Wall Studs - Danby DOM16A2SSDB Installation Manual

INSTALLATION INSTRUCTIONS

UNPACKING THE APPLIANCE

1. Open the carton and remove
the upper foam from the box.
Keep the accessories.
2. Remove the microwave from the
carton and remove the plastic
bag.
3. Remove the mounting bracket
from the upper foam.

FINDING THE WALL STUDS

1. Use a stud fi nder to locate the
wall stud. If a stud fi nder is not
available, use a hammer to tap
lightly on the wall to fi nd a solid
sound. This sound indicates the
location of the wall stud.
2. Find the center of the wall stud
by probing the wall with a
small nail to fi nd the edges of
the stud. Draw a line down the
center of the wall stud.
Note: The microwave must be
connected to at least one wall stud.
1
2
3
8