Check For Proper Damper Operation - Danby DOM014401G1 Installation Manual

INSTALLATION INSTRUCTIONS - OUTSIDE TOP EXHAUST
Using the top cabinet template
There are instructions on the top cabinet template
that detail how it should be used.
Tape the top cabinet template to the under side of
the cabinet where the microwave will be installed.
Drill holes for the top support screws, a hole large
enough for the power cord to fi t through and a
cutout large enough for the exhaust adapter.

Check for proper damper operation

Place the microwave in its upright position with the
Blower Plate
top of the appliance facing up.
Damper
Make sure the tape securing the damper is removed
and the damper pivots easily before mounting the
microwave.
Back of microwave
Attach the exhaust adapter to the blower plate by
sliding it into the guides. Secure the adapter with
one sheet metal screw.
Screw
Guide
Blower Plate
Guide
12