Page 3
Claims based on defects attributable to improper installation and/or application, and the consequences thereof, are also excluded. If the supplied cable of the luminaire is damaged, it must be replaced by WE-EF or a WE-EF authorized agent.
Page 4
Wall Luminaire Surface Mounted FLC122 FLC142 IP55, IK07, Class I, ta= 40°C...
Page 5
Installation Procedure 2) Remove mounting flange A by loosening 1) Switch off and isolate mains electrical supply. screws B. Detach terminal connector C. 3) Check that rating shown on luminaire label 4) Determine position for fixing screws D. Drill conforms with mains electrical supply. relevant holes E and insert nylon plugs F.
Page 6
5) Feed mains supply cable G (and second cable 6) Luminaire is also supplied with accessories to H for through wiring, if required, FLC142 suit a variety of cable types. Unscrew ONLY) through membrane spout(s) I (for membrane sprout(s) I and place packing ring L diameters 1-9mm), while setting mounting (for cable diameters 7-9.5mm) or packing ring flange A in position.
Page 7
9) Ensure that all surfaces are clean and dry. Position luminaire over mounting flange A and attach terminal connector C. Tighten screwsB.