Using Dpbs Function - Dell 210-BDFZ User Manual

Using DPBS function

Waking on the USB-C cable
When you connect the USB-C cable, the Monitor/PC state is as follows:
1 1
Initial monitor power state (ON or Standby)
USB Type-C
Initial system power state (ON)
USB Type-C
1 1
Initial monitor power state (ON or Standby)
USB Type-C
Initial system power state (OFF)
USB Type-C
No USB-C Cable
The display will go into Standby mode in 4 minutes.
Connect USB-C cable
www.dell.com/P2723QE
No USB-C Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/P2723QE
Connect USB-C cable
2 2
New Power state of monitor (ON)
New Power state of system (ON)
USB Type-C
2 2
New Power state of monitor (ON)
*
New Power state of system (ON)
USB Type-C
*Not all Dell PC systems support to wake up
the platform via the monitor.
Setting up the monitor
│
37