Bottom View - Dell 210-BDFZ User Manual

Bottom view

Label Description
Security lock slot
1
(based on Kensington
Security Slot
2 Power connector
3 Stand lock
4 HDMI port
5 DisplayPort
6 USB Type-C
SuperSpeed USB
5Gbps (USB 3.2
7
GEN1) Type-A
downstream port x 4
8 RJ-45 connector
1 2 3 4
Bottom view without monitor stand
Secures monitor with security cable lock (sold separately)
)
TM
Connect the power cable (shipped with your monitor).
To lock the stand to the monitor using a M3 x 6 mm screw
(screw not included).
Connect your computer with the HDMI 2.0 cable.
Connect your computer with the DisplayPort cable
(shipped with your monitor).
Connect to your computer using the USB Type-C cable (C
to C).
The alternate mode with DP 1.4 support the maximum
resolution of 3840 X 2160 at 60 Hz, PD 20 V/4.5 A, 15 V/3
A, 9 V/3 A, 5 V/3 A.
NOTE: USB-C is not supported on Windows versions
that are prior to Windows 10.
Port with
Connect your USB device. You can use these ports
only after you have connected the USB cable from the
computer to the monitor.
NOTE: To avoid signal interference, when a wireless USB
device has been connected to a USB downstream port, it
is NOT recommended to connect any other USB devices
to the adjacent port(s).
Connect Internet. You can surf Internet via RJ45 only after
you have connected the USB cable (A to C or C to C) from
the computer to the monitor.
5 6 7 8 7
Use
icon supports 5 V/ 0.9 A.
About your monitor
│
11