Advertisement

Quick Links

W110 LXT Downflow Softeners
and SXT Filters
Installation, Operation and Maintenance
Manual
WARNING
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information
can result in death, serious personal injury, property
damage, or damage to the equipment.
Keep this Manual for future reference.
WARNING
!
You are required to consult the local building and plumbing
codes prior to installation. If the information in this manual
is not consistent with local building or plumbing codes,
the local codes should be followed. Inquire with governing
authorities for additional local requirements.
WARNING
!
Need for Periodic Inspection/Maintenance: This product
must be tested periodically in compliance with local codes, but
at least once per year or more as service conditions warrant .
All products must be retested once maintenance has been
performed . Corrosive water conditions, and/or unauthorized
adjustments or repair could render the product ineffective for the
service intended . Regular checking and cleaning of the prod-
uct's internal components helps assure maximum life and proper
product function .
W110 SXT Filter
W110 LXT Softener

Table of Contents

System Specification Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
How To Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pre-Installation Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
General Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Start-Up Instructions LXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Timer Features LXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Timer Operation LXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Start-Up Instructions SXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Timer Features SXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Timer Operation SXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Master Programming Mode LXT . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Diagnostic Programming Mode LXT . . . . . . . . . . . . . . . . . . . . . .13
Master Programming Mode Chart SXT . . . . . . . . . . . . . . . . . . . . . . 14
Master Programming Mode SXT . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
User Programming Mode SXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Diagnostic Programming Mode SXT . . . . . . . . . . . . . . . . . . . . . . . . 20
Powerhead Assembly LXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Powerhead Assembly SXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
W110 Control Valve Assembly Downflow/Upflow . . . . . . . . . . . . . . . . . . 23
3/4" Plastic Turbine Meter Assembly . . . . . . . . . . . . . . . . . . . . . . . . 24
Bypass Valve Assembly (Plastic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Bypass Valve Assembly (Stainless Steel) . . . . . . . . . . . . . . . . . . . . . . . . . . .25
2310 Safety Brine Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Water Conditioner Flow Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Troubleshooting LXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Troubleshooting SXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Job Specification Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
IOM-WQ-W110

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W110 LXT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Watts W110 LXT

  • Page 1: Table Of Contents

    IOM-WQ-W110 W110 LXT Downflow Softeners and SXT Filters Installation, Operation and Maintenance Manual W110 LXT Softener Table of Contents W110 SXT Filter System Specification Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information .
  • Page 2: System Specification Tables

    16 x 10 x 55 NF10-W110 W110 10 x 54 16 x 11 x 62 NF12-W110 W110 12 x 52 17 x 13 x 60 NF14-W110 W110 14 x 65 18 x 15 x 74 W110 LXT Downflow Softeners and SXT Filters...
  • Page 3 16 x 11 x 62 NX12-W110 W110 12 x 52 17 x 13 x 60 NX14-W110 W110 14 x 65 18 x 15 x 74 NX16-W110 W110 16 x 65 20 x 17 x 74 W110 LXT Downflow Softeners and SXT Filters...
  • Page 4: Safety Information

    . recommended . Dow Corning® Silicone Compound (available from During cold weather it is recommended that the installer warm Watts), is recommended for best possible results . Dow Corning ® the valve to room temperature before operating .
  • Page 5: General Installation Instructions

    . The brine tank refill must be done after programming the system . W110 LXT Downflow Softeners and SXT Filters...
  • Page 6: System Configuration

    System Configuration The chart below is for dealer use only . Use this information to configure the system to suit the application . The W110 LXT timer will use the settings to calculate cycle times . Resin Volume Tank Diameter...
  • Page 7: Start-Up Instructions Lxt

    • Day of the week reserve calculates a reserve for each day based on the past 4 weeks . • The Flow Indicator flashes when outlet flow is detected . • The Service Icon flashes if a regeneration cycle has been queued . W110 LXT Downflow Softeners and SXT Filters...
  • Page 8: Timer Operation Lxt

    . To clear a queued regeneration, press the Extra Cycle button again to cancel . If regeneration occurs for any reason prior to the delayed regeneration time, the manual regeneration request will be cleared . W110 LXT Downflow Softeners and SXT Filters...
  • Page 9: Start-Up Instructions Sxt

    • While in service, the display alternates between time of day, volume remaining or days to regeneration . • The Flow Indicator flashes when outlet flow is detected . • The Service Icon flashes if a regeneration cycle has been queued . W110 LXT Downflow Softeners and SXT Filters...
  • Page 10: Timer Operation Sxt

    . capacity to compensate for regeneration delays . Control programming is stored in memory permanently . W110 LXT Downflow Softeners and SXT Filters...
  • Page 11: Master Programming Mode Lxt

    . NOTICE This unit has a day of the week reserve . It calculates a reserve for each day of the week based on the past 4 weeks . W110 LXT Downflow Softeners and SXT Filters...
  • Page 12 . NOTICE This unit has a day of the week reserve . It calculates a reserve for each day of the week based on the past 4 weeks . W110 LXT Downflow Softeners and SXT Filters...
  • Page 13: Diagnostic Programming Mode Lxt

    Displays the average water usage for day 5, in cubic meters. Displays the average water usage for day 6, in cubic meters. Displays the average water usage for day 7, in cubic meters. W110 LXT Downflow Softeners and SXT Filters...
  • Page 14: Master Programming Mode Chart Sxt

    Meter pulses per gallon for generic/other flow meter Some items may not be shown depending on timer configuration. The timer will discard any changes and exit Master Programming Mode if any button is not pressed for 5 minutes. W110 LXT Downflow Softeners and SXT Filters...
  • Page 15: Master Programming Mode Sxt

    Hold the Extra Cycle button while powering up the unit . This resets all of the parameters in the unit . Check and verify the choices selected in Master Programming Mode . Figure 14 W110 LXT Downflow Softeners and SXT Filters...
  • Page 16 . Use the Up and Down buttons to adjust the value as needed . Figure 20 Range: 0-half of the calculated Figure 17 Range: 1-199 grains (mg/l) W110 LXT Downflow Softeners and SXT Filters...
  • Page 17 . The abbreviations used are listed below . Abbreviation Cycle Step Brine Draw Brine Fill Air Draw Figure 24 Backwash Rapid Rinse Service W110 LXT Downflow Softeners and SXT Filters...
  • Page 18 3/4" Turbine Meter P1.0 1" Paddle Wheel Meter t1.0 1" Turbine Meter P1.5 1.5" Paddle Wheel Meter t1.5 1.5" Turbine Meter P2.0 2" Paddle Wheel Meter Generic or Other non-Fleck Meter Figure 26 W110 LXT Downflow Softeners and SXT Filters...
  • Page 19: User Programming Mode Sxt

    4 . Press the Extra Cycle button . Use this display to adjust the Feed Water Hardness . This option setting is identified by "H" in the upper left hand corner of the screen . Figure 30 Range: 1-199 hardness W110 LXT Downflow Softeners and SXT Filters...
  • Page 20: Diagnostic Programming Mode Sxt

    4 . Press the Up button . Use this display to view the Hours in Service since the last regeneration cycle . This option setting is identified by "HR" in the upper left hand corner of the screen . Figure 35 W110 LXT Downflow Softeners and SXT Filters...
  • Page 21: Powerhead Assembly Lxt

    4 ....1 ..61835 ....Motor Assembly *Call your distributor for part number . W110 LXT Downflow Softeners and SXT Filters...
  • Page 22: Powerhead Assembly Sxt

    4 ....1 ..61835 ....Motor Assembly W110 LXT Downflow Softeners and SXT Filters...
  • Page 23: W110 Control Valve Assembly Downflow/Upflow

    In filter units, both injector holes are plugged with 18276-01...60705-06 ... .DLFC, Plastic, 0 .60 gpm W110 LXT Downflow Softeners and SXT Filters...
  • Page 24: 3/4" Plastic Turbine Meter Assembly

    6 ....1 ..60049 ....Bypass Plastic Not Shown: 2 ..19228-01 ..Adapter Assy, Coupling, w/O-rings W110 LXT Downflow Softeners and SXT Filters...
  • Page 25: Bypass Valve Assembly (Stainless Steel)

    ..60002-26 .25 ..Air Check, #500, 26 .25" Long ..60002-33 .25 ..Air Check, #500, 33 .25" Long W110 LXT Downflow Softeners and SXT Filters...
  • Page 26: Water Conditioner Flow Diagrams

    Water Conditioner Flow Diagrams A. Downflow 4. Rapid Rinse Position 1. Service Position 5. Brine Tank Refill Position 2. Backwash Position 3. Brine/Slow Rinse Position W110 LXT Downflow Softeners and SXT Filters...
  • Page 27 Water Conditioner Flow Diagrams (continued) B. Upflow 1. Service Position 4. Rapid Rinse Position 2. Backwash Position 5. Brine Tank Refill Position 3. Brine/Slow Rinse Position W110 LXT Downflow Softeners and SXT Filters...
  • Page 28: Troubleshooting Lxt

    Check that the correct system capacity and meter size has been selected. Valve has failed to find position in one Fail Safe Error Unplug the unit and plug it back in. If error continues, call technical support. minute. W110 LXT Downflow Softeners and SXT Filters...
  • Page 29: Troubleshooting Sxt

    After reconfiguring the system, step the valve through a manual regeneration. If error continues, call technical support. Valve has failed to find position in one Fail Safe Error Unplug the unit and plug it back in. If error continues, call technical support. minute. W110 LXT Downflow Softeners and SXT Filters...
  • Page 30: Job Specification Sheet

    C . Rapid Rinse: _____________________________Minutes D . Brine Tank Refill: _________________________Minutes E . Pause Time: _____________________________Minutes F . Second Backwash: _______________________Minutes 4. Drain Line Flow Control: ______________________gpm 5. Brine Line Flow Control: ______________________gpm 6. Injector Size#: ____________________________________ W110 LXT Downflow Softeners and SXT Filters...
  • Page 31: Notes

    NOTES W110 LXT Downflow Softeners and SXT Filters...
  • Page 32 LIMITED WARRANTY: Certain Watts products come with a limited warranty from Watts Regulator Co. Other products may have no warranty or are covered by the original manufacturer’s warranty only. For specific product warranty information, please visit www.watts.com or the published literature that comes with your product. Any remedies stated in such warranties are exclusive and are the only remedies for breach of warranty.

Table of Contents