Before you start
EN
After recharge, slide it back into your tool. A simple push and slight
pressure will be sufficient. (Fig. 7).
Fig.6
Battery pack power bar
The Li-Ion battery pack (7) is equipped with a POWER BAR
which is used to give an indication of the battery pack's remaining
charge. Press the POWER BAR button (6) to check battery charge
as below. The LED will stay lit for approximately 10 seconds.
32
32
1
5
2
6
WARNING! To prevent accidental starting
that could cause serious personal injury,
always remove the battery pack(s) from the
product when assembling parts or making any
adjustments.
Fig.7
76-100%
51-75%
26-50%
<25%
TTI894GRD