Parts List; Verify The Pc Setup - Cisco 805 Series Quick Start Manual

Router cabling and setup

Hide thumbs Also See for 805 Series:

Table of Contents

Complete the information below, and keep it for reference.

Company product purchased from

Company telephone number

Product model number

Product serial number

Maintenance contract number

Overview

This document describes the basic process of cabling and configuring the Internet access device, the Cisco 805 router. For

advanced cabling information, refer to the Cisco 805 Router Hardware Installation Guide. For advanced configuration

information, refer to the Cisco 805 Router Software Configuration Guide. These documents are available on Cisco.com.

Parts List

The shipment of your Cisco 800 series router includes the following items:

• One Cisco 805 router

• One yellow Ethernet cable

• One black power supply

• One black power supply cord

• Product Documentation

Before you begin, verify that each computer that will be connected to the router has a network interface card (NIC) installed

and that Transmission Control Protocol/Internet Protocol (TCP/IP) has been loaded and configured. For more information on

how to configure TCP/IP, refer to the PC Configuration Instructions to Establish Cisco Router-to-PC Communications, which

is available on Cisco.com.

Table of Contents