Specifications - SoundCraft LX10 User Manual

Noise
Measured RMS, 22Hz to 22kHz Bandwidth
Mic E.I.N @ unity gain, 150W source impedance
Mix Output, 24 inputs routed to mix, faders at unity, muted
Mix Output, 24 inputs routed to mix, faders down
Crosstalk (@1kHz, typical)
Fader attenuation
Aux attenuation
Pan isolation
Adjacent channel crosstalk
Channel Mute
Fader cut-off (rel. 0 mark)
Aux Send pots offness
Frequency Response
Mic/Line Input to any output, 20Hz-20kHz
THD + N
Mic sens. -30dBu, +20dBu at all outputs @ 1kHz
CMRR
Typical @ max gain @ 1kHz
Typical @ any gain @ 50Hz
Input & Output Impedance
Mic Input
Line Input
Stereo Input
2TK Return
Mix, Aux and Insert Sends
Input & Output Levels
Mic Input max. level
Line Input max. level
Stereo Input max. level
2TK Return
Headphones (@ 200Ω)
USB 2.0 (Standard B)
Inputs / Outputs
Bit Depth
Sampling rate
Power Consumption
AC mains supply (internal PSU)

SPECIFICATIONS

44.1kHz / 48kHz / 88.2kHz / 96kHz / 176.4kHz / 192kHz
90V-240VAC, 50/60Hz universal input
-129dBu
<-80dBu
<-100dBu
>95dB
>80dB
>75dB
>-80dB
>90dB
>90dB
>80dB
<1dB
<0.006%
>80dB
>60dB
1.8kΩ
10kΩ
8.6kΩ
12kΩ
75Ω
+22dBu
+22dBu
+22dBu
>30dBu
150mW
2-in, 2-out
16-bit, 24-bit
31