Troubleshooting - Lamona LAM3410 Instructions And Installation

Built-in Single Fan Oven

14. Troubleshooting

Troubleshooting guide
Symptoms
Oven emits steam
when it is in use.
Product emits metal
noises while heating
and cooling.
Product does not
operate.
Oven light does
not work.
Oven does not heat.
No reaction of the
touch user interface
Display shows 'STOP'
Condensation on
door or control panel
Test error code
If you cannot eliminate the problem after following the instructions
in this section, consult your depot or the Authorised Service Agent.
Never try to repair a non-functional product yourself.
28
Possible cause
• Food is being cooked
with a high water content.
• When the oven cavity heats
up or cools down parts will
expand and contract.
• The mains fuse is maybe
defective or has tripped.
• Product is not
connected properly.
Check all power
connections.
• Oven bulb is defective
Replace oven bulb.
• Power is cut
• Function and / or
temperature are not set.
• The timer is not adjusted
correctly. Reset the oven
timer.
• Power is cut
• Steam and condensation on
the user interface panel
• Child lock active
• Expected in normal function.
Not a product fault.
• Possible timer fault
www.howdens.com
LAM3410 LAM3411
Solutions
It is normal that steam
escapes from food during
cooking. This is not a fault.
This is quite normal and
the oven is designed to
accommodate such
movement (this is not a fault).
Check fuses in the fuse
box. If necessary, replace
or reset them.
Check if there is power.
Check the fuses in the fuse
box. If necessary, replace or
reset the fuses.
Set the function and the
temperature with the Function
and/or Temperature knob/key.
Check if there is power.
Check the fuses in the fuse
box. If necessary, replace or
reset the fuses.
Clean with a microfibre cloth
the user interface panel to
remove the condensation
layer
See page 16
No action required
Call the Lamona Service line
on 0344 460 0006