Skil BW9501-00 Owner's Manual page 18

g. Verify saw blade is centered on the wheel (through the tracking view window). If not
centered, repeat above steps.
Fig. 12
Tracking
View
Window
Upper
Door
Knob
Blade Guide Assembly
Adjustment (Fig. 13)
To prevent the blade from twisting or breaking,
the blade guide assembly should always be
set approximately 1/8" (3.2 mm) above the
workpiece.
a. Disconnect the saw from power source.
b. Turn the blade guide locking knob
counterclockwise to unlock the blade guide
assembly.
c. Use a scrap piece of the same wood you
are about to cut as a guide, to set the height
of the blade guide assembly. Raise or lower
the blade guide assembly by turning the
blade guide adjustment knob.
d. Lock the blade guides in place by turning the locking knob clockwise.
WARNING
18
Tracking
Locknut
Tracking
Knob
Always lock the blade guide assembly in place before turning on the band
saw.
Upper
Wheel
Fig. 13
Blade Guide
Adjustment
Knob
Blade Guide
Assembly
Tracking
View
Window
Blade Guide
Locking
Knob