Powering The Dolphin Terminal; Charging The Dolphin Terminal - Honeywell Dolphin 9900 User Manual

Powering the Dolphin Terminal

When seated in a Mobile Base that is connected to the appropriate power source, the Dolphin terminal
receives the power to charge its main battery and run its internal circuitry. Keep the Mobile Base plugged
into the power source so that the Dolphin terminal battery pack stays fully charged.
For more information about powering the Mobile Base, see
12-6.

Charging the Dolphin Terminal

The Mobile Base supplies charging power to the Dolphin terminal so that the terminal can monitor the
charging of its battery pack. This charging method protects the battery from being damaged by
overcharging. Therefore, the Dolphin terminal may be stored indefinitely in the Mobile Base without
damage to the terminal, the battery pack, or the Mobile Base.
To charge a Dolphin terminal, complete these steps:
1. Insert a battery pack into the Dolphin terminal.
2. Slide the terminal, imager window up and the LCD visible, into the terminal well of the Mobile Base
until it stops.
3. When the Dolphin terminal is properly seated, the DOCK LED on the Mobile Base illuminates solid
green. The terminal begins charging automatically.
12 - 4
Powering the Dolphin Mobile Base
Rev B
7/9/08
on page
Dolphin® 9900 Mobile Computer
User's Guide