Uncrating; Crate Cover; Crate Brackets; Crate Disposal - BRP SKI-DOO MX Z X 600RS 2016 Manual

UNCRATING

UNCRATING

Crate Cover

1. Carefully lay crate on its bottom.
NOTICE Allowing crate to drop may cause se-
rious damage to vehicle.
2. Remove all screws retaining crate top to side-
walls.
mbl2015-002-001_a
3. Remove screws securing sidewalls to crate
base.
4. Unscrew sidewalls one at the time.
mbl2015-002-002_a
5. Remove polyethylene foam sheets.
NOTICE
Do not remove protective wrapping
until delivery to customer.
6. Remove parts to be installed from vehicle or
crate base.

Crate Brackets

Make sure vehicle is properly
CAUTION
supported before removing ski legs and rear
suspension from crate brackets.
1. Remove ski leg wood protectors (if applicable).
2. Detach ski legs from crate shipping brackets.
4 / 13
3. Discard shipping bolts and shipping inserts.
Keep spacers for ski installation.
mbl2011-005-001_a
1. Shipping bolts (discard)
2. Shipping inserts (discard)
3. Spacers (keep)
Discard shipping bracket.
4. Using a pry bar, remove wood blocks retaining
track to crate base.
mbl2010-003-001_a
1. Track
2. Wood block
5. Remove vehicle from crate base.

Crate Disposal

The ECO crate is designed to be disassem-
NOTE:
bled easily in order to be stacked with very low
height or to be disposed as per environmental reg-
ulations.
1. Pull canvas off top and sidewall wood struc-
tures.
2. Stack or dispose as per local environmental reg-
ulations.
2016-5 PREDELIVERY