Bosch Condens 7000 WP Installation And Maintenance Instructions Manual page 51

Changed service functions
Read off the changed service functions and enter the values here.
 Label with "settings in the service menu" filled out and affixed.
Heating controls:
 Weather-compensated control
 Remote control × ...... pce., heating circuit(s) coding:
 Room temperature-dependent control × ...... pce., heating circuit(s) coding:
 Module × ...... pce., heating circuit(s) coding:
Miscellaneous:
 Heating controls set, Notes:
 Changed settings for the heating controls documented in the operating/installation instructions for the control unit
The following work has been carried out:
 Electrical connections checked, Notes:
 Condensate trap filled
 Function check carried out
Commissioning includes checking the setting values, a visual leak test on the appliance and a function check of both the device and its control. The
system installer conducts a test of the heating system.
The system named above has been checked to the extent described.
___________________________________________________________
Name of service engineer
____________________________________________________________
Date, system installer's signature
Table 31 Commissioning report
Condens 7000 WP – 6721842519 (2022/03)
 Room temperature-dependent control
 Carry out a combustion air/flue gas test
 Leak test carried out on the gas and water sides
The documents have been handed over to the user. The user has been
made aware of the safety instructions and operation of the above-
mentioned wall mounted boiler, including accessories. Attention has been
drawn to the requirement for regular maintenance of the above-mentioned
heating system.
__________________________________________________________
Date, user's signature
Affix the test report here.
Technical information and reports
51