Table of Contents
Advertisement
Once the soap tank has been filled \ refilled, press the
FILL button. The pump will run for one minute, priming
the piping with soap. Once soap begins dispensing
from the spout, priming is complete. Press the FILL
button again to stop the priming before the minute is
over.
Indication: continuous solid light in the sensor eye.
BATTERY REPLACEMENT
Battery models only
When the battery requires replacement, the red indicator light will blink at a constant rate when the user's hands
are within the sensor range. The battery must be replaced within two weeks.
To replace the battery in battery models:
1. Carefully open the battery box, use a 2.5 mm Allen key.
2. Remove the old batteries.
3. Replace the used batteries with new D batteries.
4. Close the box.
Version 1, 17 March 2021, Page 8 of 12
Advertisement
Table of Contents
