Clearing Obstructions From Your; Motorbar Tm Cleaner Head - Dyson v11 User Manual

Clearing obstructions from your

Motorbar™ cleaner head
Your Motorbar™ cleaner head doesn't have a washable brush bar.
To maintain optimum performance, check your brush bar regularly and clear
any obstructions.
Make sure your machine is disconnected from the charger and make sure your
machine power is turned off.
Remove your brush bar
Don't put any part of your machine in a dishwasher or use detergents, polishes
or air fresheners.
Press the cleaner head release button on the end of the wand. Place the cleaner
head upside down.
Use a coin to unlock the end cap.
Twist the end cap and remove it from your brush bar. Don't wash the end cap.
Slide your brush bar out of the cleaner head.
Look for obstructions
Clear any debris from your brush bar.
Check inside the cleaner head and remove any debris or blockages.
Your Motorbar™ cleaner head and brush bar aren't washable.
Wipe over with a damp lint-free cloth.
Don't put any part of your machine in a dishwasher or use detergents,
polishes or air fresheners.
Replace your brush bar
Push the end cap back on to your brush bar and slide it back into the
cleaner head.
Turn the end cap into the locked position.
The lock located on
the side of the cleaner
head, is rotated 90 ° to
release the end cap and
the brush bar can be
removed.
The removal of the brush bars
showing the lock in a horizontal
position and the unlock symbol
at 90° anti-clockwise and lock
symbol at 90° clockwise.